This bearings will be mounted outside of the chassis. Gives additional support when using the stock Tamiya trans. Not needed with the Impact TU3 for Panther and Jagdpanther. For mounting it is only neccessary to make one extra hole into the chassis. Content: Two bearings, one for the each side and screws
The Set includes two sprocket wheel hubs from resin for the sprocket wheel of the Tamiya Panther G / Jagdpanther and two neodymium magnets. The hubs replace the Tamiya kit parts B6. They have a hole on the backside of the hub to glue in the magnets. With magnets holding in the hub center, you no longer have to glue on the stock hub, and it is now easy to remove the hub to remove the drive sprockets.